How to connect your DVD player to your TV - Filmview Services: Video Production Sydney, creators of professional video productions, motion graphics and video editing that engages, entertains and intrigues your audience. Specialists in film, broadcast & event content for screens
When it comes to hooking your DVD player to
your TV there are normally a number of options supplied by the player. If you
look on the back of the player you will normally see a group of connections
that are made up of 1 yellow, 1 red and 1 white socket – these are your
“composite” connections and represent 1 video connection (yellow) and 2 stereo
audio connections (left – white, right – red).
You should also expect to see another group
of connections made up of 1 red, 1 blue and 1 green socket. These are for
“component” connections and are all 3 are video connections. Each one
represents the 1 of the 3 colours that make up video colour - red, green and
blue. In this case each connection sends a colour signal to the TV. That being
the case, this means 3 times as much data is being sent to the TV than the
single video cable represented by the yellow connection. Naturally this results
in better picture quality. When using the component connections you need more
cables as you will need 3 to connect the video image and 2 more to connect the
stereo audio.
Most the time the DVD player will come with
the composite/audio cables included. That will be one cable with red ends, one
with white ends and one with yellow ends. For simplicity it is easiest to match
colour cable to colour socket on both TV and DVD player, but in reality it does
not matter what colour cable is plugged in where provided that each cable end
is plugged in to a matching colour socket. i.e you can plug the yellow headed
cable in to the red socket of the DVD player, provided that the other end of
the yellow cable goes in to the red socket of the TV. This means that if you
have spare cables floating around the house, you can use them in any of the
sockets and upgrade your viewing to “component” and increase your picture
quality.
If there is only one set of red/white
sockets for audio on your DVD player, then these are the only ones to use for
sound. If there are 2 pairs of red/white sockets, then 1 will be situated with
the yellow video connection and should be used only when using the yellow
“composite” socket, the other pair should be the pair you use if you are using
the “component” (red, green, blue) connections.
Some players will also come with a 3rd
connection that is called SCART. This appears as a grid like set of slots
surrounded by an (almost) square rim. SCART is similar to component in that it
only sends the video signal in high quality. The picture quality of this
connection will be similar to that of the component signal, however, you will
still need the red and white headed cables to be able to connect the sound.
In some of the newer players, you will also
find a thin rectangular video connection called HDMI. This connection is for
transmitting the signal digitally to the TV. Like component and SCART, it only
transmits the picture signal and the sound will still need to be carried to the
TV via the red and white headed cables. The advantage of HDMI is that there is
no need for the DVD player to change the digital signal of the DVD disc back to
an older style analog signal which all the previously mentioned type of
connections transmit. The upside of this will result in better picture quality,
however, only the new flat screen plasma and LCD TVs can read this signal. If
you are sending the DVD signal to an older “tube” TV then, the older TV won’t
even have the HDMI connection built in, so don’t waste any money going out and
buying and HDMI cable. In this case it is recommended to use the component or
SCART connections for best picture quality.
Disclaimer: Dime-Co.Com is an online information article and video article network. All articles, video articles, comments, and other features herein are for informational purposes only and are provided "as is" without warranties, representations or guarantees of any kind. The views and opinions expressed in an article, comments, links or blogs are the author's own, and not necessarily those of dime-co.com's owners. For full disclaimer, please read our TOS.